أهلا بكم ضيفنا الكريم. سجل دخولك او إنظم إلينا

1 من الإجابات

عدم إمكانية تفعيل DHCP Client Service

السائل: 809 شوهد مايكروسوفت, مشكلة

المشكلة تكمن في عدم القدرة على تفعيل خيار  Obtain an Ip Address automatically في TCP/IP Configuration مما يتطلب أن أضع اعدادات ال TCP بطرقة يدوية و عند محاولة تشغيل service الخاصة به يرفض مع إعطاء الخطأ التالي:

(windows could not start the DHCP client services on local computer Error 1068)

 

Error 1068

Print Friendly

1 من الإجابات



  1. ابراهيم on May 28, 2012

    Resolution

    The DHCP Client Service in Windows XP, depends on these three components:

    AFD
    NetBios over Tcpip
    TCP/IP Protocol Driver

    If one of the above drivers fail to start, then the DHCP Client Service may not start.

    Step I – Make sure that the three driver files are present

    Open Windows Explorer and navigate to %Windir%\System32\Drivers folder. Make sure that the following files are present in the folder:

    afd.sys
    tcpip.sys
    netbt.sys

    If one or more of the above driver files are missing, extract them from the Windows XP CD-ROM or from the ServicePackFiles\i386 folder, whichever is the latest version.

    Step II – Verify the number of Dependencies

    From other sources in the Web, I’ve found that installation of Norton Antivirus (NAV) adds an entry to the DHCP Service dependencies, and removing NAV does not remove the corresponding entry from the DHCP Dependencies.

    To view the dependency services registered for DHCP Client Service, type the following command in Start, Run dialog:

    CMD /K SC QC DHCP

    Verify the output. It should be exactly as below:

    [SC] GetServiceConfig SUCCESS

    SERVICE_NAME: dhcp
    TYPE : 20 WIN32_SHARE_PROCESS
    START_TYPE : 2 AUTO_START
    ERROR_CONTROL : 1 NORMAL
    BINARY_PATH_NAME : C:\WINDOWS\system32\svchost.exe -k netsvcs
    LOAD_ORDER_GROUP : TDI
    TAG : 0
    DISPLAY_NAME : DHCP Client
    DEPENDENCIES : Tcpip
    : Afd
    : NetBT
    SERVICE_START_NAME : LocalSystem

    If additional entries are listed under DEPENDENCIES…

    If any other additional drivers or Services are mentioned in the DEPENDENCIES section, you need to remove them via the registry. Follow these steps:

    Click Start, Run and type Regedit.exe
    Navigate to the following branch:
    Backup the branch to a REG file

    HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Dhcp

    Double-click DependOnService value and set its data as follows:

    Tcpip
    Afd
    NetBT

    Close Regedit.exe

    Step III – Verify that the Dependency Service / components are running

    Next step is to verify that the three dependency components are running. Follow the steps below:

    Click Start, Run and type DEVMGMT.MSC
    In the View menu, click Show hidden devices
    Double-click Non-Plug and Play drivers section
    Double-click the entry AFD, and click the Driver tab
    Set the Startup type to System.
    Start the service. Note down the error message if any.
    Similarly start the two other drivers namely:

    TCP/IP Protocol Driver
    NetBios over Tcpip

    Close Device Manager and restart Windows.

    Read more: http://wiki.answers.com/Q/How_do_you_solve_error_1068_'dependency_service_or_group_failed_to_start'_when_attempting_to_start_Computer_browser#ixzz1w9KqOyHp
    منقول

    0 من التصويتات +1 0 Votes -1 0 Votes


أجب على السؤال